Lg Washing Machine Has Oe Code. One for hot water and one for cold. Drain the water into the bucket.
LG Washing machine, WT1101CW, UE unbalance code, easy fix from
This is where water flows out from your washer when the cycle is complete. If they are, they will need to be cleaned and then reattached to the washing machine. Press the start/pause button for approximately five seconds.
Drain The Water Into The Bucket.
It tells the washer how much water is inside the tub at any given time. This is the easiest of the three components to check. The thermal overload protection feature was designed to protect your washer’s motor from overheating, causing serious and permanent destruction to your washing machine.
Once Fully Removed, Check That The Hoses Are Not Blocked In Any Way.
If they are, they will need to be cleaned and then reattached to the washing machine. Linens will not get clean. Select the tub clean cycle.
Dilute 1/4 Of Bleach In 1 Quart Of Water.
One of the reasons that your lg washer is displaying oe code is due to an unbalanced load. You might even have two separate connections; Follow these steps to reset your lg washer:
The Filter Mesh Prevents The Machine From Small Particles Contained In A Tap.
When your washing machine displays this code it means that there has been a power failure which can happen when the power supply to the appliance is interrupted during a cycle resulting from a power cut. Please visit our request a repair page for a professional service. You’ll simply look at the drain hose connected to the back of your lg washing machine to see if it’s bent or kinked.
This Should Clear The Code And Allow You To Continue Using The Washing Machine.
Probably a filter mesh is littered. This can sometimes happen when the drain hose is bent at awkward angles, is forming knots around itself, or has not been properly placed down. Lg washing machine shows an error code when there is an issue.
